Critical
HARDWARE
✓ Solution Verified by Community (30+ upvotes)
Error Code memory-management — Prusa 3D Printers
Memory management error. Faulty RAM or driver memory leak.
Oprava založena na komunitních zprávách a expertní analýze. Naposledy ověřeno: 2026-08-12
· Jak ověřujeme opravy
| Error Code | memory-management |
|---|---|
| Affected System | Prusa 3D Printers (Prusa Research) |
| Difficulty | Critical |
| Estimated Time | 20 min |
| Requires Admin Rights | ⚠️ Yes |
| Requires Reboot | 🔄 Yes |
Postup řešení
- 1 Power cycle your Prusa 3D Printers: completely disconnect from power for 30 seconds, reconnect, turn on. This clears the device firmware state.
- 2 Update Prusa 3D Printers firmware from the manufacturer's official website. Firmware updates fix known bugs.
- 3 Check all physical connections to Prusa 3D Printers. Reseat cables, try different ports, test with another cable if possible.
- 4 Reset Prusa 3D Printers to factory defaults. Consult the manual for the specific reset procedure for your model.
- 5 Update Prusa 3D Printers drivers in Device Manager: Win+X → Device Manager → find device → right-click → Update driver.
- 6 Check Prusa 3D Printers for physical damage or wear. Inspect cables, connectors, and the device itself.
- 7 Test Prusa 3D Printers on another computer or with another device to isolate whether the problem is the device or your system.
- 8 Contact Prusa 3D Printers manufacturer support if hardware appears defective. Provide the exact error description and troubleshooting steps you've tried.
🔍 Didn't work? Enter your GPU and CPU for hardware-specific advice:
🔧 Stále máte problémy?
Popište svůj přesný problém Error Buddymu a získejte personalizovanou opravu během několika sekund.
🛠️ Vyzkoušet Error Buddy — Zdarma